Sega House of the Dead, Operator'S Manual

Page: 40 / 59

to send it in an "as is assembled" condition. If these are disabled, what's charged to said
high tension voltage can be discharged, causing a very hazardous situation. Therefore,
under no circumstances should it be disassembled.
STATIC ELECTRICITY; Touching the CRT surface sometimes causes you to
slightly feel electricity. This is because the CRT surfaces are subject to static and will not
adversely affect a human body.
INSTALLATION AND REMOVAL; Ensure that the Magnetizer Coil, FBT (Fly-Back
Transformer), Anode Lead and Focus Lead are not positioned close to the sheet metal
work's sharp edges, etc. and avoid damaging the insulated portions so as not to cause an
electric shock and malfunctioning.
For purposes of static prevention, special coating is applied to the CRT face of
this product. To protect the coating, pay attention to the following points. Damaging the
coating film can cause electric shock to the customers. For the caution to be heeded
when cleaning, refer to the section of
Periodic Inspection Table .
> Do not rub with a hard item (a rod with pointed
edge, pen, etc.) to or on the CRT surfaces.
> Avoid applying stickers, seals, etc. on the CRT
face.
> Removing the alumnuim foils can cause static
prevention effects to be lowered.
9 - 2 CLEANING THE SCREEN
Static preventive coating is applied to the CRT surfaces. When cleaning, pay
attention to the following points. Peeling off static preventive coat can cause electric
shock.
> Remove smears by using a dry, soft cloth (flannels, etc.). Do not use coarse gauze, etc.