Sega House of the Dead, Operator'S Manual

Page: 18 / 59

6. EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine intially
or collecting cash, or when the machine does not function correctly, perform checking in accordance with the
explanations given in this section. The following show tests and modes that should be utilized as applicable.
ITEMS DESCRIPTION SECTIONS
INSTALLATION
OF MACHINE
When the machine is installed, perform the
following:
1.> Check to see that each setting is as per
standard setting made at the time of shipment.
2.> In the INPUT TEST mode, check each SW
and VR.
3.> In the OUTPUT TEST mode, check each
of the lamps.
4.> In the MEMORY TEST mode, check IC's
on the IC Board.
6-9, 6-10
6-5
6-6
6-3, 6-4
MEMORY
Choose MEMORY TEST in the MENU mode
to allow the MEMORY test to be performed.
In this test, PROGRAM RAMs, ROMs, and
ICs on the IC Board are checked.
6-3, 6-4
PERIODIC
SERVICING
Periodically perform the following:
1.> MEMORY TEST
2.> Ascertain each setting.
3.> In the INPUT TEST mode, test the
CONTROL device.
4.> In the OUTPUT TEST mode, check each
of the lamps.
6-3, 6-4
6-9, 6-10
6-5
6-6
CONTROL
SYSTEM
1.>In the INPUT TEST mode, check each SW
and VR.
2.> Adjust or replace each SW and VR.
3.> If the problem can not be solved yet, check
the CONTROL's moves.
6-5
7
7
MONITOR
In the MONITOR ADJUSTMENT mode,
check to see if the MONITOR adjustment is
appropriately made.
6-8
IC BOARD
1.> MEMORY TEST
2.> In the SOUND TEST mode, check the
sound related ROM's.
6-3, 6-4
6-7
DATA CHECK
Check such data as game play time and
histogram to adjust the difficulty level, etc.
6-12