Seg MRD1-T, Manual

Page: 59 / 64

TB MRD1-T 10.01 E 59
9 Tables / Connection diagrams
9.1 Possible event messages
Display Event

Parameterset x is selected to active working set

Parameter setting via interface is active

Parameter setting via interface is not permitted

Default parameter settings reloaded

Manual DEVICE RESET is performed

External DEVICE RESET is performed

Software DEVICE RESET is performed

Blocking feature activated by external input

End of blocking

Difference current trip

Difference current trip released

Difference current high-set trip

Difference current high-set trip released

Change output relay state (except Selftest relay)

Selftest relay is energized

Selftest supervision relay is de-energized

Lamp test is finished

Test of the output is finished

Self-test is finished

Offline-Test-Mode is active

Offline-Test-Mode is not active

Fault recorder is cleared

Event recorder is cleared

System start / device initialization

Time/date setting was changed (old time)

Time/date setting was changed (new time)