14
Setting EcoStar Auto device
EcoStar Info, EcoStar Auto
Press
This screen appears:
Ramp time
(in CPAP mode) or
latency time
(in
APAP mode) when the time ramp tr is selected,
otherwise this parameter is not displayed
Increase or decrease the value displayed pressing
the button
or
.
Press
This screen appears:
Comfort pressure
Increase or decrease the value displayed using the
button
or
.
Press
This screen appears:
Auto ON
You can enable (1) or disable (0) the feature
pressing the button
or
.
Press
This screen appears:
Comfort Calibration
You can enable (1) the feature either continuously,
or during the ramp (
), or disable it (0) pressing
the button
or
.
Press
This screen appears:
Pneumatic Calibration
Using the button
or
, you can select a
configuration 22 (tubing 22 mm diameter,
standard), 15 (tubing 15 mm diameter), HH
(humidifier), SP (specific present) or -- (specific
absent).
The value displayed on the right below represents
the diameter of the patient tubing used with the
heated humidifier.
For specific calibration, refer to "Specific calibration
of the pneumatic configuration" page 17.
Press
This screen appears:
Command on Inspiratory Flow Limitation
,
available in APAP mode only.
The command can be enabled (1) or disabled (0)
pressing the button
or
.
