16
Setting the clock
EcoStar Info, EcoStar Auto
Press the information access button
again to exit the parameter settings menu.
The display will show the status of your device as shown hereafter:
The device is in standby.
The device is in operation.
CAUTION
If, when in use, a problem with the memorized settings is detected, the device stops and displays the
message
Er 1.
Press
for 1 second (the device displays the blinking message
dEF
), then the button
.
The machine is then automatically reset to the default values and you can set the desired parameters again.
Setting the clock
You can set the time only when the device is in standby.
Press
for 2 seconds,
then keeping it hold
down, press
.
This screen appears:
Once the buttons are released, the
symbol of adjustment
appears under
the hour and the letter
h
blinks.
You can
change the time displayed by using the
button
or
.
Press
This screen appears:
The symbol of minute
min
blinks in turn.
You can set the minutes by following the
same procedure as for the hour.
Press the information access button
to exit the menu.
