manualshive.com logo in svg

SEF 548.04, Operating Manual

Share
Download
SEF 548.04 Operating Manual Download Page 91

6.0 Production

Page 6.3

Production for 548.04 \ 05.2010 \

The System will be central switched on and off with the main 
switch beside the operating panel. The gluing or soldering pro-
cess will be central controlled via the operating panel.

Prerequisites for starting the machine are that

 

a soldering or gluing pro

fi

 le has been loaded

 

the system has been preheated

 

the system is ready.

 

Turn the main switch to 

<ON>

.

On the LCD-Display you will get the system information.

 

SEF GmbH 

Re

fl

 ow-System 

548.04 

 

 

 
 

                        (c) SEF GmbH 2004

 

                        Rev. 1.0

The system screen appears.

The System starts with the last stored program.

 With 

the 

<Enter>

-key you turn on the heating pro-

cess. The status is shown in the dis play.

 Settings 

  Program           Measuring 

Sy stem

HEATER 1 

   V = 20 cm/min. 

 

    Prg.: 03

4                     READY   

210°C

 Start the  Production 

On

 Turn the 
System on

Summary of Contents for 548.04







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands