Pic.7
-
press switch into position “2”
3 speed (high)
-
press switch into position “3”
The sensor switch with the symbol of the light bulb, intended to turn on the lamp at insufficient
illumination of the working area of the cooker, is located on the left side of body of the cooker hood.
Switch a cooker hood on
:
- press on any of the speed control buttons (1, 2, 3);
- turn on lighting if necessary (button with bulb symbol).
Switch a cooker hood off
:
- press the touch speed control button (1, 2, 3), depending on the speed at which the cooker hood
is working (1-1, 2-2, 3-3).
Switching the hood on and off with the sensor switch is double-pressing, that is, pressing the speed
1 – the cooker hood is switched on, press speed 1 again – the cooker hood is turned off.
Starting the timer:
To start the timer, press one of the sensor buttons (1, 2, 3) and hold it
for 5 seconds. The timer will automatically switch off the lightning and
turbofan in 5 minutes..
7.4 Control of cooker hood using a remote control (Pic. 7).
.
-
Press the buttons 1, 4 or 5 to switch on the cooker hood. To switch off the
hood, press the button 1.
-
To increase or decrease the speed, press the button 5 or 4, respectively.
-
Press the button 2 to switch the light on or off.
-
To activate the timer, press the button 6 when the cooker hood is switched on.
-
To switch off the timer, press the buttons 6.
8.
INSTRUCTION ON THE CARE OF THE COOKER HOOD
ATTENTION! BEFORE CLEANING THE COOKER HOOD, DISCONNECT IT FROM THE
ELECTRIC GRID.
8.1
For external cleaning of stainless steel cooker hoods, use special tools in accordance with the
relevant instructions.
8.2
Never use abrasive detergents and soda, acid, chloride or solvent, rough sponges to clean the
cooker hood.
8.3
By washing, avoid moisture entering the current-carrying parts of the cooker hood, and especially
into the electronic control unit; after washing, wipe the surface with a soft cloth.
8.4
For cleaning glass surfaces, conventional glass cleaning means are suitable.
ATTENTION!
When closing the internal glass, avoid a sharp blow. In the event of a sharp blow,
the body is deformed and the lamps are damaged!
8.5
The aluminium filter, holding oil and dust from the air, is clogged and should be washed after
being soaked in hot water with an effective detergent once every 1.5 to 2 months, depending of the cooker
hood use.
Changing of the color of the filter after washing does not affect the quality of its work.
8.6
To remove the aluminum filter (Pic. 8), press the spring latch and by pulling down remove the filter
