6. COOKER HOOD INSTALLING INSTRUCTION
6.1
Select the operation mode and place to install the cooker hood.
6.2
Remove the cooker hood from the packing box.
6.3
Check the work of the cooker hood, connect to the electric grid and check all its functions.
We remind that the height of installation of the cooker hood over the electric cookers should be at
least 500 mm, and above the gas one – not less than 650 mm (Pic. 1).
6.4
Taking into account the established height and for the cooker hood to fit to the bottom of the lower
shelf of the wall cabinet according to a previously made paper pattern, mark and cut a rectangular hole
according to the dimension AxB (Pic. 4) of the built-in part of the hood.
6.5 Cooker hood installation VERSION nr. 1
6.5.1
Using a screwdriver loosens four screws on both sides by 0.5 turn (position 1 of Pic. 5). Thereafter,
open the inner glass and pull out the grease-absorbing aluminium filter.
6.5.2
Using your hand unscrew the nut by 5 turns (do not completely unscrew) (position 2 of Pic. 5) on
both sides.
6.5.3
Insert the hood into the slotted rectangular hole by gently pressing on the elastic clamps (Pic. 5).
Using your hand tighten the nut on both sides (position 2 of Pic. 5) until the hood fits snugly to the bottom of
the lower shelf of the wall cabinet.
6.5.4
Install the grease-absorbing aluminium filter, close the inner glass.
Pic. 4
