
68
AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)
For the remainder of the
first 2 hours after surfacing
,
information will continue to be displayed as Surface Mode
(Fig. 63) and you will have full access to other modes
(e.g., Plan, Fly, Desat, Log, Set, PC, Sim).
To access the Dive Planner (Plan Mode) - (page 48)
• press the Advance (Front) button 1 time (while in
Surface Mode)
• press and release the Select (Side) button to advance
through the sequence of available 'adjusted' depths/
times one screen at a time.
• The unit will revert to Surface Mode after 2 minutes,
unless the Advance (Front) button is pressed to access
the Fly Mode.
The Dive Planner now shows 'adjusted' No Decompression
Limits (Fig. 64) based on residual nitrogen and accumulated
oxygen calculated to be remaining from the previous dives.
NOTE: The Planning Sequence will only
advance to the maximum depth allowed by the
nitrogen or oxygen limit, whichever is in
control. The respective bar graph will be dis-
played to indicate which is in control.
Fig. 63 - Surface Mode
Fig. 64 - Plan Mode
Summary of Contents for XP5
