manualshive.com logo in svg

Seemann XP5, Owner'S Manual, Page: 56 / 108

Share
Download
Seemann XP5 Owner'S Manual Download Page 56

56

VIOLATION MODES

Violation Modes that the XP 5 can enter are termed - Condi-
tional, Delayed, and Immediate.  Permanent Violation Mode
and Gauge Mode are continuations of these.

WARNING:  It is important to understand each
different Violation Mode and how to carry out
emergency procedures in the event that you
enter one.

NOTE:  Upon entry into certain Violation Modes,
the Audible Alarm will emit a 30 second con-
tinuous tone followed by a 5 second steady
beep.  The Alarm will sound even if it is user
Set OFF.  It also cannot be turned off by press-
ing the Advance (Front) button.

While in Violation Modes, the Alternate Displays previously
described can be accessed using the Advance (Front)
button.

NOTE:  While in  Violation Modes, the XP 5  will
automatically  revert to the Main Display after 3
seconds unless the Advance (Front) button is
pressed to view another display of informa-
tion.

Responsible

Summary of Contents for XP5













































































































Reviews:

No comments