
26
SET MODES
To help simplify the operations you might perform at the
dive site, settings are divided into 2 categories. Set Mode
#1 includes several settings that you would change more
often and Set Mode #2 includes those items not likely to
change once you set them. Set Mode 2 can be accessed
by first entering settings in Set Mode 1, or by bypassing Set
Mode 1.
After gaining access to Set Mode 1 or Set Mode 2, settings
can be made in sequence one after the other, or you can
access a specific item that you want to set bypassing
others. The descriptions that follow describe access to
each setting from Surface Mode.
Set Mode Access Timing
While in Surface Mode, press Both buttons and hold -
• after 2 seconds, SET: 1 appears (Fig. 18)
• after 4 seconds, SET: 2 appears (Fig. 19)
• Access is gained to Set Modes by releasing the buttons
during the 2 second window in which SET: 1 or SET: 2
appears, then pressing the Advance (Front) button.
• If the buttons are held longer and SET 1 and 2 are both
bypassed, the unit will go to Simulator Mode which is
described on page 75.
• While in the Set Mode, if neither button is pressed for 2
minutes, the unit will revert to Surface Mode.
Fig. 18 - Set Mode 1
Fig. 19 - Set Mode 2
Summary of Contents for XP5
