manualshive.com logo in svg

Seemann XP5, Owner'S Manual, Page: 21 / 108

Share
Download
Seemann XP5 Owner'S Manual Download Page 21

21

•  It should not be considered that the capabilities built into the XP 5 provide

an implied approval or consent from SEEMANN for individuals to exceed
the defined limits for recreational diving, as agreed on by all
internationally recognized training agencies.

•  The oxygen features of the XP 5 are intended for use by recreational

divers trained for nitrox diving by an instructor certified by a recognized
training agency to teach diving with nitrox.

•  Conducting repetitive dives using enriched nitrogen-oxygen mixtures can lead to

oxygen buildup, reducing oxygen tolerance while increasing the risk of pulmonary
oxygen toxicity.

•   The XP 5 provides information based upon a personal dive profile, and

therefore must not be shared between divers.  It is impossible for two
divers to stay precisely together underwater, and  your computer's dive
profile tracking of previous dives will be pertinent to you only.  Nitrogen
and oxygen loading of a second user may be significantly different and
swapping dive computers could  lead to inaccurate and dangerous predic-
tions of decompression and oxygen accumulation status.

WARNINGS AND SAFETY RECOMMENDATIONS

Summary of Contents for XP5













































































































Reviews:

No comments