Seemann XP5, Owner'S Manual, Page: 102 / 108

102
OPERATIONAL PERFORMANCE (continued)
Activation:
• Manual - push button (recommended)
• Automatic - by immersion in water (as a backup, if set ON)
• H2O graphic indicates Wet Contacts are bridged (unit must be dried prior to transport or storage).
• Cannot be manually activated deeper than 4 feet (1.2 meters), if the Water Activation feature is set OFF.
• Cannot be activated at elevations higher than 14,000 feet (4,267 meters)
Shutoff:
• Automatically shuts off if no dive is made within 120 minutes after initial activation. Reactivation required.
• Automatically shuts off 24 hours after last dive (will reactivate if the H2O graphic is displayed).
• Cannot be shut off manually.
Setting FO2:
• Automatically set for 'Air' upon activation
• Remains set for Air unless an FO2 numerical value is set
• Nitrox set points from 21 to 50 %
• If set for 21%, remains set for 21% until changed
• If set for >21%, it reverts to 50% 10 minutes after the dive, if the FO2 Default is ON. If the FO2 Default is OFF, the value will re-
main at the value set.
Operating Temperature:
• The ATMOS 2 will operate in almost any temperature diving environment in the world, between 32 °F and 140 °F (0 and 60
°C). At extremely low temperatures, the LCD may become sluggish, but this will not affect it's accuracy. If stored or trans-
ported in extremely low temperature areas (below freezing), you should warm the module and its battery with body heat before
diving.
ACCESSORIES ( optional items available from your Authorized AERIS Dealer)
• Lens Protector (computer module) - adheres to lens face, prevents scratches
• PC download package (hardware and software)
• Battery Kit - includes 1 battery, 1 battery hatch o-ring, silicone grease
SPECIFICATIONS (CONTINUED)