manualshive.com logo in svg

Seemann XP5, Owner'S Manual, Page: 2 / 108

Share
Download
Seemann XP5 Owner'S Manual Download Page 2

2

LIMITED TWO-YEAR WARRANTY

For details, refer to the Product Warranty Registration Card provided.

COPYRIGHT NOTICE

This owner’s guide is copyrighted, all rights are reserved.  It may not, in whole or in part, be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form
without prior consent in writing from Seemann.

SEEMANN SUB GmbH & Co. KG

Johann-Höllfritsch-Str. 47

D-90530 Wendelstein

TRADEMARK NOTICE

XP 5, Seemann and the Semann logo are all registered and unregistered trademarks of Seenmann
Sub GmbH & Co. KG.  All rights are reserved.

PATENT NOTICE

U.S. Patents have been issued, or applied for, to protect the following design features:
Dive Time Remaining (U.S. Patent no. 4,586,136), Data Sensing and Processing Device (U.S.
Patent no. 4,882,678), and Ascent Rate Indicator (U.S. Patent no. 5,156,055).  User Setable
Display (U.S. Patent no. 5,845,235) is owned by Suunto Oy (Finland).

DECOMPRESSION MODEL

The programs within the XP 5 simulate the absorption of nitrogen into the body by using a math-
ematical model.  This model is merely a way to apply a limited set of data to a large range of expe-
riences.  The XP 5 dive computer model is based upon the latest research and experiments in de-
compression theory.  

Still, using the XP 5, just as using the U.S. Navy (or other) No Decom-

pression Tables, is no guarantee of avoiding decompression sickness, i.e. “the bends.”

Every diver’s physiology is different, and can even vary from day to day.  No machine can pre-
dict how your body will react to a particular dive profile.

Summary of Contents for XP5













































































































Reviews:

No comments