3
List of Contents
1.0 Design and Purpose
1.1 Illustration
1.2 Machine Specification
1.3 Shipping Details
2.0 Handling Instructions
2.1 Positioning
2.2 Foundation Drawings
3.0 Connection to a Dust Extraction System
3.1 Chip Extraction Hood
4.0 Electrical Installation
5.0 Switchgear
5.1 The Padlockable Isolator
5.2 Start/Stop Buttons
5.3 Two/Three Position Rotary Switch
5.4 Circuit Protection
5.5 Brake Release Switch
5.6 Optional Emergency Foot Operated Stop Switch
6.0 Guarding
6.1 The Front Cutterblock Guard
6.2 The Rear Cutterblock Guard
6.3 The Rear Drive Guard
6.4 The Anti Kickback Fingers
7.0 The Cutterblock / Knife Changing
7.1 The Optional TERSA Monobloc
8.0 Preparation of the Workpiece
8.1 Pilot Checks
9.0 Surface Planing
9.1 Flatting
9.2 Planing Wide
9.3 Bowed Boards
9.4 Edge Planing (Squaring)
9.5 Bevelling or Chamfering
9.6 Push Blocks and Push Sticks
10.0 Thicknessing
11.0 Diagnosing Faults in Planing
12.0 Limitations of Use and Safe & Working Practices
12.1 Noise Reduction
12.2 Warning Labels
13.0 Maintenance
13.1 Lubrication
13.2 Cutterblock & Bearings
13.3 Vee Belt and Pulleys
13.4 The Feed Rollers
13.5 Planer Tables
13.6 The Fence
14.0 Parts Illustration
14.1 Parts List
15.0 Wiring Diagrams
