Front Panel Menu Operation
34
4. Day/Night Mode
Using the Configurator you can program day mode and night mode separately for different system sensitivity levels.
Select the Day/Night mode option in the Command Menu if you would like to manually set the Day/Night mode.
To enter the Day/Night Mode option, you must be in the Command Menu. To enter the Command Menu, press
when the display is in normal mode.
At this point the display will vary, depending on your choice:
•
If you selected “yes”
, continue to step 3.
•
If you selected “no”
, the display will show the message “Operation cancelled”, and then it will return to the
Command Menu.
Step 1: Select Day/Night Mode
1. Use
and
to scroll the cursor to “Day/Night
mode”
2. Press
to continue.
Step 2: Enter your passcode (if required)
Enter your passcode.
See page 10 for instructions on
entering passcodes.
Step 3: Select “yes” or “no”
1. Use
and
to select “yes” or “no”.
2. Press
to continue.
Step 4: Select Mode
1. Use
and
to select “Manual Daytime”,
“Manual Night”, or “Auto day/night”.
2. Press
to continue. The display will now return
to the Command Menu.
Note:
The panel will stay in the mode you select until you change it to another mode.
- Command Menu -
3 Walktest
4 Day/night mode
5 Set time
Enter passcode for
level 2 or higher:
Day/night mode set
to auto daytime
operation
Change? Y
- Select Mode -
1 Manual Daytime
2 Manual Night
3 Auto day/night