MMX
TM
User Guide
29
Assisted Walk Test
Assisted Walk Test must be configured using the Configurator. When the Assisted Walk Test is configured, the
One Man Walk Test is replaced by the Assisted Walk Test. The Assisted Wall Test shall be in silent mode only.
To enter the Walk Test Menu, you must be in the Command Menu. To enter the Command Menu, press
when the display is in normal mode.
Step 1: Select the Walk Test Menu
1. Use
and
to scroll the cursor to “Walktest”.
2. Press
to select the Walk Test Menu.
Step 2: Enter your passcode (if required)
Enter your passcode.
See page 10 for instructions on
entering passcodes.
Step 3: Select the Assisted Walk Test option
1. Use
and
to scroll the cursor through the
menu.
2. Press
to select the “Assisted” option.
Press
to exit and return to the Command Menu.
Step 4: Select the Assisted Walk Test to see this next menu
1. Use
and
to scroll the cursor through the
menu.
2. Press
to
select
an area for testing.
3. Start inspecting devices. All alarm and trouble events
shall be saved in the Walk Test log.
Press
to exit and return to the Command Menu.
- Command Menu -
1 Reports
2 Bypass
3 Walktest
Enter passcode for
level 1 or higher:
- Walktest -
1 Assisted
2 Walktest report
- Walktest -
1st Floor
2nd Floor