Front Panel Menu Operation
30
Walk Test Report
The Walk Test Report provides on screen and printer logs for both the One Man Walk Test and the Assisted Walk
Test. To enter the Walk Test Menu, you must be in the Command Menu. To enter the Command Menu, press
when the display is in normal mode.
Walk Test Screen Report
Step 5: Main Walk Test Screen
During the Assisted Walk Test the display will be as
shown.
1. Use
and
to scroll the cursor through the
devices.
A = number of Walk Test alarm events
T = number of Walk Test trouble eventss
D = number of duplicate events other than alarm and
troubles
R = number of remaining events from the Walk Test list
Press
to exit and return to the Command Menu.
Step 5: Walk Test Device Screen
Device display will be as shown.
A = total number of alarm events for the device.
T = total number of trouble events for the device.
Step 1: Select the Walk Test Menu
1. Use
and
to scroll the cursor to “Walktest”.
2. Press
to select the Walk Test Menu.
Step 2: Enter your passcode (if required)
Enter your passcode.
See page 10 for instructions on
entering passcodes.
Step 3: Select the Walk Test Report
1. Use
and
to scroll the cursor through the
menu.
2. Press
to select “Walktest report” option.
1st Floor
A:xxxx D:xxxx R:xxxx
T:xxxx D:xxxx R:xxxx
Press CANCEL to end
Nnn Lnn Adrnnnnnnnn
A: nnn T:nnn
Tag 1
Tag 2
- Command Menu -
1 Reports
2 Bypass
3 Walktest
Enter passcode for
level 1 or higher:
- Walktest -
1 One Man
2 Walktest report