9
General OSD Operation
Call preset 95 to enter the OSD, call preset 94 to exit the OSD.
Up or Down: Move the cursor UP and DOWN within the OSD, change the value on the
OSD.
Right: Enter the option, select the item or confirm.
Left: Return to main menu or cancel.
Zoom Display: This displays the current zoom of the camera.
Time Display:
This displays the current Date and Time of the camera’s internal clock.
Angle Display: This displays the current coordinates of the cam
era’
IR Display:
☀
means the IR display status is on.
means the IR is on.
Remark: “-”means the cursor selecting some option. “
” means editing the content of
some options.
NOTE:
The default communication settings for this camera are BAUD = 2400,
ADDRESS = 1 and PROTOCOL = PELCO D.
CAUTION:
THERE ARE NO DIP SWITCHES IN THE CAMERA. DO NOT OPEN
THE CAMERA CASING FOR ANY REASON. DOING SO WILL VOID
THE WARRANTY. THE ONLY WAY TO SET THE ADDRESS AND
BAUD RATE SETTINGS IS BY USING THE OSD MENU.
From the MAIN MENU, enter the SYSTEM MENU, then select COMM
SET and follow the directions on page 11 of this manual.
Summary of Contents for ST-PTZMINI-IR10X
Page 10: ...10 OSD Menu ...
