16
<SCHEDULE>: To schedule events, select the <SCHEDULE> menu
item and the screen shown at left will appear. Use the PTZ
controller’s LEFT and RIGHT controls to move through the Hour,
Minute and Second fields (h00:m00:s00) and set the start and
end times for the first event and choose the desired action to
perform. Event types are: Preset 1 thru 8, A-B Scan, 360° Scan,
Tour, Pattern or no action. After setting the action, press RIGHT
again to move the cursor (-) to the beginning of the line and use
DOWN to move the cursor down to the next line and repeat the
process for as many events as desired (up to 8 max). When
done, cursor down to SAVE and press RIGHT to save the
settings and exit the SCHEDULE window.
NOTE: Ensure that no events overlap in time. If events do overlap,
the one which is scheduled to begin first will take priority and run
until its end time.
Language
<LANGUAGE> : The default language for this North American
version camera is English and cannot be changed.
Reset
<RESET>
CAM DATA: This setting is not applicable to this model of camera.
The menu will allow the user to proceed as if camera module
initialization is taking place, but the procedure will have no effect
on the camera settings.
SYS DATA: Using this function will reset all system data and memory
in the camera and return the camera to its factory default
settings.
ALL USER PRESETS, TOURS, PATTERNS, SCANS AND
SCHEDULED EVENTS WILL BE ERASED.
This function is identical to the FACTORY RESET function below.
FACTORY DEFAULT: Using this function will reset all system data
and memory in the camera and return the camera to its factory
default settings.
ALL USER PRESETS, TOURS, PATTERNS, SCANS AND
SCHEDULED EVENTS WILL BE ERASED.
This function is identical to the SYS DATA function above.
<SCHEDULE>
START END ACT
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
SAVE
<LANGUAGE>
LANGUAGE ENGLISH
EXIT
<RESET>
CAM DATA
SYS DATA
FACTORY DEFAULT
CALIBRATION 15D
EXIT
Summary of Contents for ST-PTZMINI-IR10X
Page 10: ...10 OSD Menu ...
