13
<GUARD TOUR>: Selecting this will display the GUARD TOUR
setup screen shown
at left. Use the PTZ controller’s LEFT and
RIGHT controls to navigate to preset points, times and speeds
for each of the 16 “ID” slots desired. Use the PTZ controller’s UP
and DOWN controls to change the value of the selected
parameter. The TIME setting determines how long the camera
will remain on each preset point and the SPEED setting
determines how quickly the camera will travel to the next point.
The ID numbers are a reference only, and cannot be changed.
When finished with the first 8 points, selecting <NEXT PAGE>
will display the screen shown at left. Use this screen to continue
setting as many of the points 9 thru 16 as desired. When
finished, select SAVE PATTERN to lock in the settings and exit
the GUARD TOUR setup screen.
NOTE:
The reserved preset numbers on page 8 of this manual
cannot be used for camera positioning. They are reserved for
special functions.
Dome Functions
<PATTERN>
The camera can store 4 patterns, each containing up to 512 individual
PTZ commands (roughly 10 minutes).
PATTERN NO: First select the pattern (1 thru 4) to be set up or called.
CALL PATTERN: If a pattern has been previously recorded, selecting
this option will call the pattern number shown above and the
camera will begin playing back the recorded pattern. The pattern
will play in a loop until any PTZ command is received by the
camera.
<PATTERN> : Selecting this will display the pattern recording screen
shown at left
. The camera is now “live” and can be controlled in
realtime using the PTZ controller.
“XXX” indicates the amount of
controller moves used and increases as you record, to a
maximum of 512. When done recording camera movements,
calling preset 1on your PTZ controller will store the pattern in the
camera. Calling preset 2 will cancel the pattern store operation.
<GUARD TOUR >
ID POINT TIME SPEED
01 01 05 64
02 02 05 64
03 03 05 64
04 04 05 64
05 05 05 64
06 06 05 64
07 07 05 64
08 08 05 64
<NEXT PAGE>
<GUARD TOUR >
ID POINT TIME SPEED
09 09 05 64
10 10 05 64
11 11 05 64
12 12 05 64
13 13 05 64
14 14 05 64
15 15 05 64
16 16 05 64
SAVE PATTERN
<PATTERN>
PATTERN NO 1
CALL PATTERN
<PATTERN>
EXIT
<PATTERN>
PATTERN NO 1
CALL PATTERN
<PATTERN>
XXX / 512
PRESET 1: SAVE
PRESET 2: BACK
EXIT
Summary of Contents for ST-PTZMINI-IR10X
Page 10: ...10 OSD Menu ...
