Security Tronix ST-PTZMINI-IR10X, Installation Manual

Page: 7 / 17

7
Instructions
Power On Action
When initializing the system, the display shown at left will appear roughly 5
seconds after powering the camera.
When restoring the original factory settings it will take roughly 1 minute for
the camera to restore all settings and reboot.
This display indicates that the camera is initializing the pan and tilt
motors.
The initialization of pan and tilt motors is now complete. The camera is now
initializing and detecting the module of camera.
.
The display now indicates that “ST-370” is the specific model of camera
module which is installed. This is displayed after the camera finishes detection.
Self testing is now complete.
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE
VERSION V1.2
PAN INIT
TILT INIT
POWER ON
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE
VERSION V1.2
PAN
INIT
TILT INIT
POWER ON
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE ST-370
VERSION V1.2
PAN
INIT
TILT INIT
POWER ON