12
Dome Functions
<PRESET>
PRESET NO: Select a preset number to be called or edited.
CALL PRESET:
This will send the ‘call preset’ command to the
camera, for the preset number selected above.
SET PRESET: Selecting SET PRESET will display the screen shown
at left. The camera can be aimed toward the desired position
using the PTZ controller. Calling preset 1on your PTZ controller
will store the preset in the camera. Calling preset 2 will cancel
the preset store operation.
NOTE:
The reserved preset numbers on page 8 of this manual
cannot be used for camera positioning. They are reserved for
special functions.
NOTE 2:
It is generally much easier to use the PTZ controller’s
“Write Preset” commands to save a preset position in the
camera, rather than this method which uses the camera’s OSD
menu.
Dome Functions
<SCAN>
SCAN SPEED: The scan speed can be set to values from 1 thru 9.
The speed set on this page will affect Left-Right scans and 360°
scans.
NOTE:
The effective range of Left-Right scans is a minimum of 20°
between points and a maximum of 340° between points.
Dome Functions
<GUARD TOUR>
The camera can store 4 tours, each containing up to 16 steps.
Each step will be assigned an individual preset, dwell time and
speed.
GUARD TOUR NO: First select the tour (1 thru 4) to be set up or
called.
CALL GUARD TOUR: If a tour has been previously set up, selecting
this option will call the tour number shown above and the camera
will begin touring.
<PRESET>
PRESET NO 001
CALL PRESET
SET PRESET
EXIT
<PRESET>
PRESET NO 001
CALL PRESET
<SET PRESET>
PRESET 1: SAVE
PRESET 2: BACK
EXIT
<SCAN>
SCAN SPEED 5
EXIT
<GUARD TOUR>
GUARD TOUR NO 001
CALL GUARD TOUR
<GUARD TOUR>
EXIT
Summary of Contents for ST-PTZMINI-IR10X
Page 10: ...10 OSD Menu ...
