Security Tronix ST-DVR16CH User Manual Download Page 52

Page: 52 / 76

UPNP is running on router before use it.

Picture 4.27

【

Enable

】

Choose Enable to make sure all UPNP settings available

【

HTTP

】

Route will automatically distribute HTTP port for the device,

when IE viewing, it need this port(e.g. 60.12.9.26:66)

【

TCP

】

Router will automatically distribute TCP port for the device,

when monitoring via CMS, it need this port.

【

Mobile Port

】

Router will automatically distribute Mobile Port for

the device, when mobile monitor, it need this port.

4.4.5 GUI Display

Configure the video output parameters including the front output mode

and code output mode.

Front output

：

In the local preview mode include: channel title, time

display, channel title, record status, alarm status, bit rate info, transparency
and region cover.

Code output

：

In the network surveillance and video file mode include:

channel title, time display, channel title, record status, alarm status, bit rate
info, transparency and region cover.

Page 50

Summary of Contents for ST-DVR16CH













































































Search results

Summary of Contents for ST-DVR16CH

Reviews:

Related manuals for ST-DVR16CH

Brands by name

Popular brands

Security Tronix ST-DVR16CH, User Manual

Search results

Summary of Contents for ST-DVR16CH

Reviews:

Related manuals for ST-DVR16CH

Brands by name

Popular brands