start only in the set range.
【
Record type
】
Set recording type: Regular detection or alarm.
Regular:
Perform the regular recording in the set time section. The
video file type is “R”.
Detect:
Trigger the “motion detect”, “camera mask” or “video
loss” signal. When above alarm is set as opening
recording, the “detection recording” state is on. The
video file type is “M”.
Alarm:
Trigger the external alarm signal in the set time
section. When above alarm is set as opening
recording, the “detection recording” state is on. The
video file type is “A”.
Note
：
Refer to chapter 4.3 to set corresponding alarm
function.
4.2.2 Snapshot Storage
Setup snapshot parameters for different channels. At first time it's set for
24hours snapshot continuously, please go to Main Menu->Record-
>Snapshot Storage for appropriate settings.
Note: If normal snapshot storage, please setup Snap at Main Menu-
>Advanced->Snapshot (please refer to chapter 4.5.1 HDD Manage)
Picture 4.2
【
Channel
】
Select the related channel to set, click "all" to set all
channels.
【
Pre-snap
】
Setup pre-snap picture quantity before recording, default
is Page 30
