Value input
blank
Picture 3.12 PTZ Control
2. Cruise between Points
Multiple preset points connected cruise lines, call cruise between
points, the PTZ run around on the line
1>Cruise Between Points Settings
Cruise lines are connected by multiple preset points, setting
procedure is as follows:
Step1: In Picture 3.10, the Direction key will turn PTZ to
designated location, click Settings button to enter Picture 3.13.
Step 2: click Cruise buttons, the write proper value into the Cruise
Line and Preset Points blank
，
then click Add Preset Points button,
complete setting (also can add and delete cruise line which has been
set up)
Step 3: repeat step1 and step2 , until set out all the preset
designated cruise lines.
Remove Preset
：
Please input preset value in the blank, click
Remove Preset button, then remove the preset points.
Remove Cruise Line
：
Input the number of cruise line, click
Remove Cruise Lines button, then remove the cruise lines set.
Page 21
