USER MANUAL
4
that is made available by your router. If you intend to use a static IP address (an address that is provided
by your internet service provider and never changes), click on <Static> and enter the address using the
mouse supplied with the NVR. <Save> when finished.
2
、
IPC Setup
allows you to review the cameras that were discovered by the Wizard. This list will contain
the POE cameras that were connected to the back of the NVR, along with any other compatible cameras
that were discovered on your local network via the LAN patch cable connected to your router. You can
edit the address, add, or delete a camera on this list
TIP: Use the <Auto Assign IP to camera(s)> button to refresh any previously deleted cameras, or
to add newly installed cameras to the list.
IPC Setup
Record Schedule
gives you a quick way to set up the days, times, and type of recording that you would
like to use. Select Normal (constant recording), Motion (video motion detection), or Alarm (devices
connected to the alarm input terminals) with the mouse control, left-click and drag that selection through
the schedule table.