USER MANUAL
11
Record
“Main Menu”
→
”Parameter”
→
“Record”
→“
Record” to enter into the interface shown in Picture 4-10.
Picture 4-10
TIP: Use the Pre-Record feature when your NVR is set to record events only. This will allow you
to see the activity prior to the event trigger.
Schedule
“Main Menu”
→“
Record”
→“Schedule” to enter the
interface shown in Picture 4-11 to set the
record schedule of your NVR.
TIP: Use the “Copy” feature at the bottom of the screen to quickly apply one channel’s settings
to another channel, or to all channels.
Channel
：
Set the desired channel you
wish to adjust in the drop-down menu
Record:
Enable or Disable the recording
function for the selected channel
Stream Mode
：
Select Mainstream or
Substream. Mainstream displays a higher
quality picture. Substream uses less
processor capacity for more fluent motion
of fast moving objects and consumes
less hard drive space
Pre-Record
：
Use this feature to store
and add video activity before an alarm or
motion trigger. See what causes a
trigger before it happens!
Record Schedule
gives you a quick way to
set up the days, times, and type of recording
that you would like to use. Select Normal
(constant recording), Motion (video motion
detection), or Alarm (devices connected to the
alarm input terminals) with the mouse control,
left-click and drag that selection through the
schedule table.
Normal recording times will show as “Green”,
Motion as “Yellow”, and Alarm as “Red”
Picture 4-11
