51
Parameter
Function
Working
Period
z
Motion detection function becomes activated in the specified
periods. See Figure 2-35.
z
There are six periods in one day. Please draw a circle to enable
corresponding period.
z
Select date. If you do not select, current setup applies to today
only. You can select all week column to apply to the whole
week.
z
Click OK button, system goes back to motion detection
interface; please click save button to exit.
Anti-dither
System only memorizes one event during the anti-dither period.
The value ranges from 0s to 100s.
Relay out
Enable alarm activation function. You need to select alarm output
port so that system can activate corresponding alarm device when
alarm occurs.
Please note the relay output number here is for reference
only. The alarm output number may vary due to different
series products.
Alarm Delay
System can delay the alarm output for specified time after motion
detect alarm ended. The value ranges from 10s to 300s.
Record
channel
System auto activates motion detection channel to record once
motion detect alarm occurs (working with motion detection
function). Please note you need to go to Storage-> Schedule to
set motion detect record period and go to Storage->Record
control to set current channel as auto record.
Record Delay
System can delay the record for specified time after motion detect
alarm ended. The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert
you when alarm occurs and ends.
PTZ
z
Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.
z
The event type includes: preset, tour and pattern and etc.
Snapshot
It is snapshot activation function.
2.4.1.2
Video Masking
The video masking interface is shown as in Figure 2-37.
