30
Parameter
Function
Min last time
It is to set the min time between the object continuous movement and alarm
activation.
Activation
speed
It is to set the min speed here when an object can activate an alarm.
Target filter
Check the box here to enable this function and then click button
，
you can
set the target filter model in this scene. Click the button
，
you can remove
selected target filter model.
2.2.3.9
Alarm Activation Setup
Alarm activation setup is shown as in Figure 2-20.
Figure 2-20
Please refer to the following sheet for detailed informaiton.
Parameter
Function
Rule Working period
Here you can set rule arm and disarm period. Please click the Setup button to
set.
Record
Check the box here so that the device can record when alarm activation
occurred.
Relay output
Check the box here so that the device can output an alarm when alarm
activation occurred.
