background image

 

© 2008, The Chamberlain Group, Inc.

114A3618 

All Rights Reserved

LIFTMASTER

®

 SERVICE IS 

ON CALL

OUR LARGE SERVICE ORGANIZATION

 SPANS AMERICA

INSTALLATION AND SERVICE INFORMATION IS AS NEAR 

AS YOUR TELEPHONE. SIMPLY DIAL OUR TOLL 

FREE NUMBER:

1-800-528-9131

www.liftmaster.com

For professional installation, parts and service, 

contact 

your local LIFTMASTER/CHAMBERLAIN dealer. Look for him 
in the Yellow Pages, or call our Service number for a list of 
dealers in your area.

HOW TO  ORDER

REPAIR PARTS

Selling prices will be furnished on request or parts will be 

shipped at prevailing prices and you will be billed accordingly.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE 
FOLLOWING INFORMATION:

  • 

 

PART NUMBER

  • 

PART 

NAME

  • 

MODEL 

NUMBER

ADDRESS ORDERS TO:

THE CHAMBERLAIN GROUP, INC.

Technical Support Group

6050 S. Country Club Road

Tucson, Arizona 85706

SERVICE INFORMATION

TOLL FREE NUMBER:

1-800-528-9131

LIFTMASTER FIVE-YEAR LIMITED WARRANTY

LIFETIME MOTOR LIMITED WARRANTY

The Chamberlain Group, Inc. (“Seller”) warrants to the first retail purchaser of this product, for the residence in which this product is originally 
installed, that it is free from defect in materials and/or workmanship for a period of five years from the date of purchase and that the motor is 
free from defect in materials and/or workmanship for the lifetime of the product. The proper operation of this product is dependent on your 
compliance with the instructions regarding installation, operation, maintenance and testing. Failure to comply strictly with those instructions will 
void this limited warranty in its entirety.

If, during the limited warranty period, this product appears to contain a defect covered by this limited warranty, call 1-800-528-9131, toll free, 
before dismantling this product. Then send this product, pre-paid and insured, to our service center for warranty repair. You will be advised of 
shipping instructions when you call. Please include a brief description of the problem and a dated proof-of-purchase receipt with any product 
returned for warranty repair. Products returned to Seller for warranty repair, which upon receipt by Seller are confirmed to be defective and 
covered by this limited warranty, will be repaired or replaced (at Seller’s sole option) at no cost to you and returned pre-paid. Defective parts 
will be repaired or replaced with new or factory-rebuilt parts at Seller’s sole option.

ALL IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE FIVE-YEAR LIMITED 
WARRANTY PERIOD SET FORTH ABOVE (EXCEPT THE IMPLIED WARRANTIES WITH RESPECT TO THE MOTOR, WHICH ARE 
LIMITED IN DURATION TO THE LIFETIME LIMITED WARRANTY PERIOD FOR THE MOTOR), AND NO IMPLIED WARRANTIES WILL 
EXIST OR APPLY AFTER SUCH PERIOD.  Some States do not allow limitations on how long an implied warranty lasts, so the above 
limitation may not apply to you. THIS LIMITED WARRANTY DOES NOT COVER NON-DEFECT DAMAGE, DAMAGE CAUSED BY 
IMPROPER INSTALLATION, OPERATION OR CARE (INCLUDING, BUT NOT LIMITED TO ABUSE, MISUSE, FAILURE TO PROVIDE 
REASONABLE AND NECESSARY MAINTENANCE, UNAUTHORIZED REPAIRS OR ANY ALTERATIONS TO THIS PRODUCT), LABOR 
CHARGES FOR REINSTALLING A REPAIRED OR REPLACED UNIT, REPLACEMENT OF BATTERIES AND LIGHT BULBS OR UNITS 
INSTALLED FOR NON-RESIDENTIAL USE.

THIS LIMITED WARRANTY DOES NOT COVER ANY PROBLEMS WITH, OR RELATING TO, THE GARAGE DOOR OR GARAGE DOOR 
HARDWARE, INCLUDING BUT NOT LIMITED TO THE DOOR SPRINGS, DOOR ROLLERS, DOOR ALIGNMENT OR HINGES. THIS 
LIMITED WARRANTY ALSO DOES NOT COVER ANY PROBLEMS CAUSED BY INTERFERENCE. ANY SERVICE CALL THAT 
DETERMINES THE PROBLEM HAS BEEN CAUSED BY ANY OF THESE ITEMS COULD RESULT IN A FEE TO YOU. 

UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES ARISING IN 
CONNECTION WITH USE, OR INABILITY TO USE, THIS PRODUCT. IN NO EVENT SHALL SELLER’S LIABILITY FOR BREACH OF 
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR STRICT LIABILITY EXCEED THE COST OF THE PRODUCT COVERED 
HEREBY. NO PERSON IS AUTHORIZED TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS 
PRODUCT.

 

Some provinces do not allow the exclusion or limitation of consequential, incidental or special damages, so the above limitation or exclusion may 
not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from province to province.

Summary of Contents for Elite 3575CS













































































Reviews: