1
August 2016 Issue 1 SGLT16
SeceuroGlide LT
Installation Instructions
Always check
on delivery that the order details are correct and the
door is undamaged, especially
before removing any existing doors
.
Sequence of Installation & Contents
01.
Pre-Installation and Component Check
02.
Installation Options
03.
Prepare the Opening
04.
Prepare the Guide Rails
05.
Fix Guide Rails & Axle Assembly
06.
Tensioning the Anti-fall Back Spring
07.
Fit Emergency Overrides
08.
Curtain Adjustment (reducing height/making repairs)
09.
Install the Curtain in the Guides, Attach to Axle & Fit Stops
10.
Curtain Locking & Setting Motor Limit Switches
11.
Installation of Box Supports
12.
Commissioning
13.
Technical Assistance
14.
Notes
01. PRE-INSTALLATION AND COMPONENT CHECK
Check:
i.
Delivery note
ii.
Order sheet
iii.
Door dimensions / colour
iv.
Opening dimensions / clearances
v.
Components
vi.
Check for any damage to the guide rails
or the outside roll of the curtain
Do not proceed further with the
installation unless you are sure that
the door is the correct size, and all
components are present.
WIDTHS
Manufacturing Width
= Over Guide Width
Drive Through Width
= Over Guide Width less
150mm for 75mm guides
HEIGHTS
Manufacturing Height
= Guide Height
Total Height
= Guide End Plate
Headroom/End Plate up to 2.5m Guide Height
=
300mm
Drive Through Height
= Guide Height less 100mm
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk
