SECURAM Systems Inc.
ScanLogic D66 Operation Guide
Page 24
Step 4: Scroll
to the menu selection “Disable Recovery” and Press OK.
The Recovery Option will now be disabled.
38.0 Simple Mechanical Reset
SECURAM Safe Locks can operate in either Analog mode or Digital mode. When they are paired
with the SafeLogic Series (EntryPads with no LCD screen or fingerprint reader) the safe lock
operates in analog mode.
When paired with a ScanLogic Series (EntryPads with an LCD screen) or ScanLogic (EntryPads
with a fingerprint reader and/or LCD screen), the safe lock operates in digital mode.
The ScanLogic D66 is a digital system and can be paired with any SECURAM safe lock body.
If the lock body that you are pairing the ScanLogic D66 with has been paired previously with an
analog system, for example the SafeLogic Basic (or any other SafeLogic Series EntryPad)or was set
at the factory in the default Analog mode, the following Simple Mechanical Reset procedure must be
followed.
Step 1: Ensure that the EntryPad is not connected to the lock, and that the battery is not connected
to the EntryPad.
Step 2: Find the reset hole on the back of the lock (under the QC sticker).
Step 3: Using a poke tool, depress the reset button on the back of the lock 3 times. This
discharges any latent energy within the lock’s capacitors.
