SECURAM Systems Inc.
ScanLogic D66 Operation Guide
Page 17
Step 11: Select the “End Time”
For example: If you live in North America, you can select
“Start Month”: 03
“Start Week”: 02
“Start Time”: 02
“End Month”: 11
“End Week”: 01
“End Time”: 02
This function will start at 2:00am on second Sunday of March and end at 2:00 on first Sunday of
November.
Note: Users can set “Day Light Saving” according to their certain condition.
19.0 Maximum Door Open Time (Security Level 3)
Step 1: Press “Menu/OK”, the screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select “
Max. Door Open
Time
”. Press “Menu/ OK” again.
Step 5: Press “▲” or “▼” to select the maximum allowable time that the door can be left open.
If you select Max. Door Open Time as 2 minutes, that means if the lock is opened more than
2 minutes the Screen will alert you that the lock is still opened, and the screen will illuminate
every 15 seconds continuing to alert you that the door is still open.
20.0 Show Audit Trail (Security Level 3)
Step 1: Press “Menu/OK”, the screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select “Show Audit Trail”.
Press “Menu/OK”.
Step 5: The screen will show the last record of operation on the EntryPad.
Step 6: Press ▲” or “▼” to view more records.
21.0 Set ID01 to Master (Security Level 3)
This programming command is used in order to establish a hierarchy within the Manager
(ID01)/Supervisor (ID02) code permissions. This programming feature can only be accessed
through the System Menu, when logging in with the Super Code ID00.
