Securam FPC-0601A-D66, Operation Manual

Page: 18 / 27

SECURAM Systems Inc. ScanLogic D66 Operation Guide Page 18

When ID01 is Set to Master, User ID02 cannot Delete or Disable ID01.

When ID01 is Set to Master, User ID 02 cannot “Delete All Users”.

When ID01 is Set to Master, User ID 02 cannot “Set DayLight Savings Time”

When ID01 is Set to Master, User ID 02 cannot “Set Duress Time Delay”

When ID01 is Set to Master, User ID 02 cannot “Set Device ID Number”

When ID01 is Set to Master, User ID 02 cannot Change “Security Levels”

When ID01 is Set to Master, User ID 02 cannot “Enable Dual Mode”
Step 1: Press “Menu/OK”, the screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select “Set ID01 to Master”.
Press “Menu/OK”.
“ID01 Set to Master” can be reversed to its default setting by selecting the menu selection “Set ID01
to Manager”.
22.0 System Info. (Security Level 3)
Step 1: Press “Menu/OK”. The screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System INFO.”
Step 3: Press “Menu/OK” and the LCD will show information about this safe lock system as follows:

The first line of the display will show the EntryPad Part Number: 0601A- D66 indicating this
EntryPad is a ScanLogic D66

Capacity:30 Users - Total Number of Users

Used : 00 User - Total Number of Users enrolled in the system

V9.91120511-27 -Firmware version

ID Dev 0017/ Host 1 -Device ID and Host ID

Audit :0200 -Audit trail records capacity
23.0 Set Security Level
Step 1: Press “Menu/OK”, the screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select the desired Security
Level
.

Level 1: EntryPad can be operated by a code only.

Level 2: EntryPad must be operated by a fingerprint and the code associated with that
enrolled fingerprint (“bound code”).

Level 3: EntryPad can be operated by a fingerprint or a code.
Step 5: Press “Menu/OK”.
Step 6: Press “Menu/OK” to confirm.