Radio Key
®
600e
Operating & Installation
Secura Key
5
(User Number 12)
(ADD)
(ENTER)
(ID Number 995)
(User Number 12)
(ADD)
(ENTER)
(New Password - 54321)
(Re-type New Password - 54321)
(ENTER)
Change your Password:
Put the unit into the Program mode, if necessary (see above). Present
the
THRU
Card to the unit. Then present the sequence of program cards
representing the desired new password (exactly 5 digits) to the unit. Then
present the
THRU
Card. Again present the sequence of program cards
representing the desired new password to the unit. Present the
ENTER
card to the unit. A green light and beep means that the Password was
changed. Note that 12345 is the default (factory) password; use another
number sequence for best security.
*
+ 5 + 4 + 3 + 2 + 1 +
*
+ 5 + 4 + 3 + 2 + 1 +
Add a Transponder (Key Tag) to the System:
Put the unit into the Program mode, if necessary (see above).
Present
the
ADD
card to the unit and then present the sequence of program cards
representing the desired User Number (1-600) to the unit. Then present the
ENTER
card to the unit. Hold the Transponder near the RK600e Unit. A green
light and beep means that the Transponder was accepted. A red light and three
beeps means a Transponder has already been stored for the selected User Number.
Delete the previously stored Transponder or select a new User Number.
+ 1 + 2 +
(Hold Key Tag near unit)
Add a Transponder by Entering the Transponder ID:
Instead of presenting the transponder, you can also use the Program Deck
to enter the Transponder ID number: Put the unit into the Program mode, if
necessary (see above). Present the
ADD
card to the unit and then present
the sequence of program cards representing the desired User Number
(1 - 600) to the unit. Present the
THRU
Card. Present the sequence of
program cards representing the ID number printed on the Transponder.
Then present the
ENTER
card.
+ 1 + 2 +
*
+ 9 + 9 + 5 +
Record the User Number and Transponder ID Number in the User Log Form.
