Radio Key
®
600e
Operating & Installation
Secura Key
6
(VOID)
(ENTER)
(Ending User Number 10)
(ENTER)
(Starting User No. 1)
(VOID)
(User Number 12)
(ENTER)
(VOID)
(Starting User No. 1)
(Ending User Number 10)
(ADD)
(ENTER)
Add a Series of Transponders to the System:
Put the unit into the Program mode, if necessary (see above). Present
the ADD card to the unit and then present the sequence of program cards
representing the desired starting User Number to the unit. Present the THRU
Card. Then present the sequence of program cards representing the desired
ending User Number. Present the THRU card, then present the ENTER
Card. Present the Transponders to the reader in the desired order (making a
careful record of which transponders are assigned to which User Numbers). If
one or more Transponders are already entered into the User Number range
you have selected, a red light and three beeps will occur, in which case, you
must delete the entire range (see below) before proceeding.
+ 1 +
*
+ 1 + 0 +
*
+
Delete a Transponder from the System:
Put the unit into the Program mode, if necessary (see above). Present the
VOID
card to the unit and then present the sequence of program cards representing
the desired User Number (1 - 600) to the unit. Then present the
ENTER
Card
to the unit. A green light and beep means that the Transponder was deleted.
+ 1 + 2 +
Delete a Range of Transponders from System:
Put the unit into the Program mode, if necessary (see above). Present the
VOID
card to the unit and then present the sequence of program cards
representing the desired starting User Number to the unit. Present the
THRU
Card. Then present the sequence of program cards representing
the desired ending User Number. Then present the
ENTER
Card
.
A green
light and beep means that the range of Transponders was deleted.
+ 1 +
*
+ 1 + 0 +
Delete a Transponder by Presenting to Reader:
Put the unit into the Program mode, if necessary (see above). Present the
VOID
card to the unit. Then present the
ENTER
Card to the unit.
Hold the
Transponder near the RK600e Unit. A green light and beep means that the
Transponder was deleted.
+
(Hold Key Tag near Unit)
