Radio Key
®
600e
Operating & Installation
Secura Key
7
(ID Number 995)
(VOID)
(ENTER)
(5 Seconds)
(SET TIMER)
(ENTER)
(Mode Number 2)
(MODE)
(ENTER)
(MODE)
(ENTER)
Delete a Transponder by Entering Transponder ID:
Put the unit into the Program mode, if necessary (see above). Present the
VOID
card to the unit. Present the
THRU
Card. Then present the sequence
of program cards representing the ID number printed on the Transponder.
Then present the
ENTER
card. A green light and beep means that the
transponder was deleted.
+
*
+ 9 + 9 + 5 +
Set the Latch Timer:
Put the unit into the Program mode, if necessary (see above). Present the
SET TIMER
Card to the unit. Then present the sequence of program cards
representing the desired Latch Time (0 - 30 seconds) to the unit. Present
the
ENTER
card. A green light and beep means that the Latch Timer setting
was changed. If you set the Latch Timer for “0” seconds, the actual latch
time will be approximately 0.25 seconds.
+ 5 +
Set the Operating Mode:
Put the unit into the Program mode, if necessary (see above). Present the
MODE
Card to the unit.
Then present either the “1” , “2”, or “3” card to the
unit. Present the
ENTER
card. The Access Control Unit will exit Programming
Mode and enter the selected Mode. Selections are:
1. Active (Normal) -- LED is Off
2. Inactive (Locked) -- LED blinks Red
3. Door Unlocked -- LED blinks Green
+ 2 +
To Exit Programming Mode Immediately:
Present the
MODE
Card to the unit.
Then present the “1” card to the unit.
Present the
ENTER
card. This returns the unit to normal mode immediately,
bypassing the 15 second timeout.
+ 1 +