SBC-992-pITX
SBC-992-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G Copyright © 2016 SECO S.r.l.
49
4.5.1
Advanced CPU control submenu
4.5.2
Thermal Zone configuration submenu
Menu Item
Options
Description
Cool N
’
Quiet Support
Enabled / Disabled
Enable or Disable
“
Cool N
’
Quiet
”
power saving and speed throttling technology for CPU idle states.
Multi CORE support
Auto / Disabled
Enable / Disable Multi CORE Support
CPU C-States
Auto / Disabled
C-State ACPI Management
Menu Item
Options
Description
Onboard FAN
Enabled / Disabled
Enable or Disable Onboard FAN
Low Threshold (°C)
0 °C ÷ 115 °C
This submenu is available only when
“
Onboard FAN
”
is set to Enabled.
Select the lowest temperature under which the onboard FAN must be Off
High Threshold (°C)
0 °C ÷ 115 °C
This submenu is available only when
“
Onboard FAN
”
is set to Enabled.
Select the highest temperature above which the onboard FAN must work always at Full Speed
Mid Duty Cycle
0 ÷ 100
This submenu is available only when
“
Onboard FAN
”
is set to Enabled.
Use this item to set the Duty Cycle for the FAN when the APU temperature is between Low and High
threshold. Values that can be accepted are between 0 (0% OFF) and 100 (100%Full Speed)
Passive Cooling Threshold (°C)
0 °C ÷ 115 °C
Use this item to set the temperature threshold for the CPU. Above this temperature value, the CPU swill
start to lower its frequency.
Critical temperature (°C)
0 °C ÷ 115 °C
Use this item to set the maximum temperature that the CPU can reach. Above this temperature value, the
system will perform a critical shutdown
