SBC-992-pITX
SBC-992-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G Copyright © 2016 SECO S.r.l.
34
3.3.8
S-ATA connectors
AMD G-series SOC embeds a SATA Controller, which offers a SATA II, 3.0 Gps interface, able to drive up to two
external devices.
For this reason, for the connection of external Mass Storage Devices, there are two standard S-ATA connectors.
A male S-ATA connector, CN12, is always available, independently by the version of SBC-992-pITX board
purchased.
A second SATA port is factory available in two different
versions:
A)
SATA male connector CN13
B)
SATA female connector CN14 with integrated
connector for direct SATA disk powering.
In first case, on board there will be available a second SATA
male connector, CN13, identical to the other..
Second factory alternative offers a unique standard female 22
poles S-ATA connector, which can be used also for direct
powering of SATA Hard Disk Drive.
Please be aware that S-ATA connector CN14 doesn
’
t p3.3V
power rail, so SATA disks requiring such a voltage cannot be used
with this board.
Connector used is type MOLEX p/n 87779-1001 or equivalent, with
pinout shown in the dedicated
table on the left.
S-ATA Connector - CN12
Pin Signal
1
GND
2
S
3
SATA1_Tx-
4
GND
5
SATA1_Rx-
6
S
7
GND
Optional male S-ATA
Connector - CN13
Optional S-ATA female Connector - CN14
Pin Signal
Pin Signal
Pin Signal
1
GND
S1 GND
P5 GND
2
S
S2 S
P6 GND
3
SATA0_Tx-
S3 SATA0_Tx-
P7 +5V_S
4
GND
S4 GND
P8 +5V_S
5
SATA0_Rx-
S5 SATA0_Rx-
P9 +5V_S
6
S
S6 S
P10 GND
7
GND
S7 GND
P11 GND
P1 ---
P12 GND
P2 ---
P13 +12V_S
P3 ---
P14 +12V_S
P4 GND
P15 +12V_S
