SBC-992-pITX
SBC-992-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G Copyright © 2016 SECO S.r.l.
43
4.3.4
Video configuration submenu
Menu Item
Options
Description
UMA Frame buffer Size
Auto / 64 MB / 128 MB / 256
MB / 384 MB / 512 MB / 1 GB
/ 2 GB
Set UMA Frame buffer Size
HDMI Audio
Disabled / Enabled
Enable or Disable Audio on HDMI
LFP
Disabled / External EDID /
640x480 / 800x480 /
800x600 / 1024x600 /
1024x768 / 1280x720 /
1280x800 / 1280x1024 /
1366x768 / 1440x900 /
1600x900 / 1680x1050 /
1920x1080
Select a software resolution (EDID settings) to be used for the internal flat panel.
Using External EDID, LVDS display resolution is taken by external EDID interface
Resolutions above 1600x900 are available only using eDP interface, please take care if the board
purchased offers LVDS or eDP.
LFP Color Mode
VESA 24 bpp
JEIDA 24 bpp
18 bpp
This item is effective only for boards factory configured with eDP video output on connector CN21, and an
external eDP-to-LVDS module is used.
Select the color depth of LVDS interface. For 24-bit color depth, it is possible to choose also the color
mapping on LVDS channels, i.e. if it must be VESA-compatible or JEIDA compatible.
LFP Bus Mode
Single Channel
Dual Channel
This item is effective only for boards factory configured with eDP video output on connector CN21, and an
external eDP-to-LVDS module is used.
Allows configuration of LVDS interface in Single or Dual channel mode
LFP Default Brightness
0 ÷ 100
Set the booting LVDS brightness percentage. Please be aware that a very low brightness level could make
the panel not visible.
LFP BackLight Frequency
0 ÷ 20000
Set the LVDS Backlight Frequency in Hertz
