Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
67
4.6.1
Fixed Legacy Boot Order submenu
CD/DVD Rom Boot
Enabled / Disabled
Disables or enables booting from CD/DVD
Floppy Disk Boot
Enabled / Disabled
Disables or enables booting from Floppy Disks.
USB Boot
Enabled / Disabled
Disables or enables booting from USB boot devices.
EFI/Legacy Device Order
EFI device first
Legacy device first
Smart Mode
This submenu is available only when
“
Boot Type
”
is set to Dual Boot Type.
Determine if boot must happen first through EFI devices or through legacy devices, or in Smart Mode.
Windows
®
8 Fast Boot
Enabled / Disabled
This submenu is available only when
“
Boot Type
”
is set to UEFI Boot Type.
If enabled, the system firmware does not initialize keyboard and check for firmware menu key.
USB Hot Key Support
Enabled / Disabled
Available only when
“
Boot Type
”
is set to UEFI Boot Type and
“
Windows
®
8 Fast Boot
”
is Enabled.
Enable or disable the support for USB HotKeys while booting. This will decrease the time needed to boot
the system
Timeout
0 ÷ 60
The number of seconds that the firmware will wait before booting the original default boot selection.
Reset On No Boot Device
Found
Enabled / Disabled
When this option is enabled, the system will reset itself each time that doesn
’
t find any valid boot device,
instead of waiting indefinitely that a Boot device is plugged.
Touch Controller To Enter SCU
Enabled / Disabled
When this option is enabled, it will be possible to use a Touch screen to enter the Setup Configuration
Utility, avoiding using additional external keyboard. The Touch detection will be used as hotkey
Legacy Device Fixed Order
Enabled / Disabled
Disable or enable fixed boot order for physical devices. Takes effect at the next boot of the board
Fixed Legacy Boot Order
Settings
See Submenu
This submenu is available only when
“
Legacy Device Fixed Order
”
is enabled.
Allows fixing the boot order by physical devices.
EFI
See Submenu
This submenu is available only when
“
Boot Type
”
is not set to
“
Legacy Boot type
”
.
The submenu will show a list of EFI boot devices. Use F5 and F6 key to change order for boot priority.
Legacy
See Submenu
This submenu is available only when
“
Boot Type
”
is not set to
“
UEFI Boot type
”
.
Allows setting of Legacy Boot Order
Menu Item
Options
Description
First / Second / Third / Fourth /
Fifth / Sixth
LAN / EHCI / XHCI / SATA0 /
SATA1 / SD / NONE
Allows selecting the boot order of the possible boot devices. If it is necessary to force the boot from a
specific device only, please set is as a first boot device, and set to NONE all other devices.
