Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
51
4.3.3.1
USB Ignore Settings submenu
Using this submenu, it is possible to define up to four (4) rules for the USB ports to be ignored from BIOS support, if desired. Each rule will offer the following
options:
USB Ignore Request Timeout
(sec.)
0÷30
When enabled (i.e., timeout greater than zero), for each USB bootable device it is required the user
confirmation. Without any action, when the timeout expires the USB device is ignored.
If the timeout is set to zero, it means that this feature is disabled, and the boot sequence works in the
standard way. When enabled, the Confirm Dialog Box is displayed only for disks with a valid MBR.
Display USB Device
’
s Name
Disabled / Enabled
Available only when
“
USB Ignore request Timeout (Sec.)
”
is Set.
Allows enabling / disabling the disabling of USB Device
’
s name in the timeout string.
Menu Item
Options
Description
Host Controller
None / All / Int. xHCI (Usb3.0) /
Int. EHCI (Usb2.0)
Select the Host Controller to ignore
Port
None / All / Port 0 / Port 1 /
Port 2 / Port 3 / Port 4 / Port 5 /
Port 6 / Port 7
Select the USB Port to ignore
USB Class
None
All
Hid
Mass Storage
Select the USB Class of Devices to ignore.
HID: Touch Controllers, Mouses Keyboards
Mass Storage: USB disks, CD/DVD, Floppy Disks
Vendor ID
0x0001 ÷ 0 x FFFE
Specify the Vendor ID to ignore.
0xFFFF = Ignore All
0xFFFE = Ignore None
Device ID
0x0001 ÷ 0 x FFFE
Specify the Device ID to ignore.
0xFFFF = Ignore All
0xFFFE = Ignore None
If the BIOS support is excluded for all ports and/or all HID devices, it will be impossible to enter in the Setup Configuration utility using USB
keyboards.
Please be careful before changing these settings.
