Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
57
4.3.9
Chipset configuration submenu
4.3.10
SATA configuration submenu
Menu Item
Options
Description
PCI 64-bit Decode
Enabled / Disabled
Allow system to support 64-bit BAR (Base Address Register) for PCI devices.
CRID
Enabled / Disabled
Enable / Disable CRID (Configured Revision ID) register.
Menu Item
Options
Description
SATA Controller
Enabled / Disabled
Disabled: Disables SATA Controller. All following items will be disabled
Enabled: Enables SATA Controller
Sata Port 0
Enabled / Disabled
Enables or disable SATA Port #0
Sata Port 1
Enabled / Disabled
Enables or disable SATA Port #1
Chipset SATA Mode
IDE
AHCI
Set SATA Configuration type
With AHCI, is not possible to install/boot UEFI O.S., only Legacy OS can be installed (a simpler driver is
required).
Setting to IDE, the controller is managed as a PCI device, so addresses reallocation and INT line sharing is
possible.
SATA Speed
Gen1 / Gen2
Select SATA speed
SATA Port 0 Hot Plug Capability
SATA Port 1 Hot Plug Capability
Enabled / Disabled
These items will be available only when
“
Chipset SATA Mode
”
is set to AHCI.
If enabled, SATA port will be reported as Hot Plug Capable
IDE Max Transfer Mode
Auto
Ultra ATA/100
Ultra ATA/66
Ultra ATA/33
PIO Mode
This item will be available only when
“
Chipset SATA Mode
”
is set to IDE.
Sets the IDE Interfaces
’
maximum Transfer Rate
IDE Mode
Native IDE
Legacy IDE
This item will be available only when
“
Chipset SATA Mode
”
is set to IDE.
Sets the IDE Working Mode
Serial ATA Port 0 / 1
Shows information related to eventual devices connected to SATA ports 0 or 1
