manualshive.com logo in svg

Seco Qseven Q7-974, User Manual

Share
Download
Seco Qseven Q7-974 User Manual Download Page 50

 

 

Q7-974

 

Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.  

50 

4.3.3

 

USB configuration submenu 

Menu Item 

Options 

Description 

USB BIOS Support 

Disabled / Enabled / UEFI Only 

Sets  the  support  for  USB  keyboard  /  mouse  /  storage  under  UEFI  and  DOS  environment.  When  set  to 
UEFI only, then it will support exclusively UEFI environment. 

xHCI Mode 

Disabled 
Enabled 
Auto 
Smart Auto 
Best Auto 

Mode of operation of xHCI controller 
Disabled: USB 3.0 functionalities are always disabled, USB 3.0 devices will work in High Speed Mode 
Enabled: USB 3.0 functionalities are available both in BIOS and in OS (also for booting, provided that the 
xHCI driver is installed). 
Auto: USB 3.0 devices will work only when OS has started, provided that hcSwitch and xHCI drivers are 
installed. In BIOS and during boot USB 3.0 devices will work in High Speed mode 
Smart  Auto: when starting from a Mechanical Off (G3) state, USB 3.0 functionalities  are available both in 
BIOS and in OS (also for booting, provided that the hcSwitch and xHCI driver is installed). When the system 
boots from a different ACPI state, USB 3.0 devices will be managed by xHCI or EHCI controller depending 
on the last used configuration.

 

Best Auto: always route to xHCI 

Win7 Uninstall xHCI driver 
workaround 

Disabled / Enabled 

Enable / Disable Windows 7 Uninstall xHCI driver workaround. When enabled, Windows 7 USB (EHCI 
mode) will still work after uninstalling xHCI driver, but the WHCK test will fail

 

xHCI Controller 

Disabled / Enabled 

Enable/Disable xHCI Controller for USB 3.0 functionalities support 

USB2 Link Power Management 

Disabled / Enabled 

Can be changed only when 

“

xHCI Controller

”

 Is Enabled 

Enable/Disable the USB2 Link Power Management, i.e. the management of different Link Power (Lx) States 
of connected USB devices depending on the workload of the device itself. 

xHCI Streams 

Disabled / Enabled 

Can be changed only when 

“

xHCI Controller

”

 Is Enabled 

Enable/Disable the xHCI Stream Support. 

EHCI Controller 

Disabled / Enabled 

Controls the USB EHCI (USB 2.0) functionalities. One EHCI controller must always be enabled. 

USB EHCI debug 

Disabled / Enabled 

Can be changed only when 

“

EHCI Controller

”

 Is Enabled 

Enable / Disable PCH EHCI debug capability

 

USB Per-Port Control 

Disabled / Enabled 

Allows to enable / disable singularly each of USB ports #0 ÷ #3 

USB Port #0 / USB Port #1 / 
USB Port #2 / USB Port #3 

Disabled / Enabled 

Available only when 

“

USB Per-Port Control

”

 is Enabled. 

Allows to enable / disable individually each USB port 

USB Ignore Settings 

See Submenu 

Allows excluding BIOS support for single USB Devices/Ports/Hosts. 

Summary of Contents for Qseven Q7-974












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands