ENFORCER Voice Dialer
2
SECO-LARM U.S.A., Inc.
Features:
•
Trigger-activated alarm and dialer with user-programmable 20-second alarm message
•
16-Digit large display with date/time and function icons
•
3 Triggers (1 N.C., 2 NO/NC) for multiple zone security
•
Call in at any time to listen in to room, broadcast to room, arm, and disarm dialer
•
Listen in, broadcast messages to room, and/or disarm during dialer call out
•
Programmable PIN number and entry delay timing
•
5 Programmable emergency telephone numbers (up to 32 digits each)
•
Programmable auto-dialing cycle repeat times
•
Home mode function (acts as a door chime when user is at home)
•
Panic button
•
Back-lit keypad
•
Built-in flash memory to protect against system data loss in case of power failure
•
Touch-Tone dialing
•
Low-battery indicator for backup battery (battery not included)
•
DC power input jack (power adapter not included)
•
9V battery backup (battery not included)
•
Wall-mountable
•
Built-in 105dB alarm (with programmable alarm on/off)
•
Built-in auxiliary output for external alarm or siren
•
Built-in line seizure
Table of Contents:
Features ......................................................... 2
Parts List ......................................................... 3
Specifications ................................................. 3
Wiring Diagram ............................................... 3
Overview ......................................................... 4
LCD Screen Layout ........................................ 4
Installing the Voice Dialer ........................... 4~5
Programming the Voice Dialer .................... 6~9
Setting and Changing the PIN Number ...... 6
Setting Emergency Phone Numbers ...... 6~7
Deleting a Stored Phone Number ............... 7
Setting the Siren Function .......................... 7
Setting the Auto Dial Function .................... 8
Setting the Number of Auto Dial Cycles ..... 8
Setting the Number of Call-in Rings ........... 8
Setting the Entry Delay Time ...................... 9
Setting the Date and Time .......................... 9
Record and Play Back Emergency
Message ..................................................... 9
Testing the Auto Dial Function ...................... 10
Resetting the Voice Dialer ............................ 10
Line Seizure .................................................. 10
Operating the Voice Dialer ...................... 10~13
Arming and Disarming the System ..... 10~11
Panic Button Use ...................................... 11
Remote Control by Telephone ............ 11~12
Home Mode Use ....................................... 13
Low-Battery Indicator ................................ 13
View Function ........................................... 13
Tips ............................................................... 13
Program Planner ........................................... 14
FCC Part 68 .................................................. 14
Summary Programming/Operation Chart ..... 15
Also Available from
SECO-LARM
®
........ 15
Troubleshooting ............................................ 16
ENFORCER Voice Dialer
SECO-LARM U.S.A., Inc.
15
Summary Programming/Operation Chart:
1.
Setting/Changing PIN Number (see pg. 6)
Current PIN [PROG] [ARM/DISARM] New PIN [ARM/DISARM] [PROG] x9
2.
Setting Emergency Telephone Numbers (see pgs. 6~7)
PIN [PROG] x2
[ARM/DISARM] [#/DOWN] or [*/UP]
Enter Phone #
[ARM/DISARM]
[PROG] x8
3.
Deleting a Stored Telephone Number (see pg. 7)
PIN [PROG] x2 [ARM/DISARM]
[#/DOWN] or [*/UP] [DELETE/PAUSE]
[ARM/DISARM]
[PROG] x8
4.
Setting the Siren Function (see pg. 7)
PIN [PROG] x4 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x6
5.
Setting the Auto Dial Function (see pg. 8)
PIN [PROG] x5 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x5
6.
Setting the Number of Auto Dial Cycles (see pg. 8)
PIN [PROG] x6 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x4
7.
Setting the Number of Call-in Rings (see pg. 8)
PIN [PROG] x7 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x3
8.
Setting the Entry Delay Time (see pg. 9)
PIN [PROG] x8 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x2
9.
Setting the Date/Time (see pg. 9)
PIN [PROG] x9 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] Repeat for each position [PROG] x2
10.
Record Emergency Message (see pg. 9)
11. Playback Message (see pg. 9)
PIN [REC/PLAY] Speak message (up to 20 seconds) [REC/PLAY]
[REC/PLAY]
12.
Test Auto Dial Function (see pg. 10)
(In Standby Mode)
Press and Hold [PROG]
[#/DOWN] or [*/UP]
Check to see if number is dialed
13.
Arm/Disarm System (see pgs. 10~11)
14. Remote Control by Telephone (see pgs. 11~12)
PIN [ARM/DISARM]
Receive Call
Press Key Code on Telephone Keypad
Dial Voice Dialer Number Press Key Code on Telephone Keypad
15.
View (see pg. 13)
16. Activate/Deactivate Home Mode
Last 5 Sensor Trigger Records
(In Standby Mode) [#/DOWN]
(see pg. 13)
Stored Emergency Phone Numbers (In Standby Mode)
[*UP]
(In Standby Mode)
[HOME]
For a complete listing of SECO-LARM products, please visit us online at www.seco-larm.com.
LED Strobe Light
SL-1301-BAQ
Door/Window Switches,
Magnetic Contacts, etc.
Auto Dialer
E-921APQ
Shock/Vibration Detector
SS-040Q
Tamper Switch
SS-072Q
Photobeam Sensor
E-931-S35RRQ
Also Available from SECO-LARM
®
:
