ENFORCER Voice Dialer
14
SECO-LARM U.S.A., Inc.
Program Planner:
FCC Part 68:
Use these charts during setup to record phone numbers and sensor locations for future reference.
It is recommended that you use a pencil during setup and redo it in ink afterwards. The user
should keep in a safe, easily accessible location and a copy should be retained by the installer.
Program: Numbers
Date:
NUMBER
PRIORITY
TELEPHONE NUMBER
(include area code and dialer prefix as needed, add PBX
pause and extension if applicable, see p. 6-7)
NAME OF PARTY TO BE REACHED
1
2
3
4
5
Installation: Triggers
Date:
TRIGGER
GENERAL DESCRIPTION
SENSOR LOCATIONS
1
2
3
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of the
device of this equipment is a label that contains, among other information, a product identifier in the format
US:7M7TE02BE921CPQ and REN:0.11B for this equipment.
This equipment uses the following USOC jacks: RJ-11/RJ45/USB/Power Jacks!
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
REN (RINGER EQUIVALENT NUMBERS) STATEMENT
Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5.
If this equipment US: 7M7TE02BE921CPQ causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC
if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment US: 7M7TE02BE921CPQ, for repair or warranty information, please contact
SmartRG, Inc. If the equipment is causing harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this US:
7M7TE02BE921CPQ does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
ENFORCER Voice Dialer
SECO-LARM U.S.A., Inc.
3
Back Connection Area (Cover Removed)
LINE TEL
Telephone Wall Jack
+
-
Buzzer (–) O/P
Buzzer (+) O/P
or
Telephone Extension
External Alarm/Siren
CA- 161T
DC Plug-to-Terminal
Block
Power Adapter
(Not Included)
SM-206Q*
E-964-D390Q*
NO/NC Trigger in 1
NO/NC Trigger in 2
N.C. Trigger in 3
Trigger ground
SM-200Q*
Note:
For proper operation, the telephone extension
line and wall jack line must not be reversed.
Operating voltage
9~12 VDC
Current draw
Max. (at 12VDC)
Standby
5mA
Dialing
20mA
Alarm On
150mA
Relay On
50mA
Speaker On
250mA
Total
480mA
Emergency voice message length (user recorded)
Up to 20s
Programmable emergency phone numbers
5
Maximum digits per telephone number
32
Backup battery type/life (not included)
9VDC/≈20h
Alarm sound level at 12" (30cm)
≥105dB
Trigger inputs
Triggers 1 and 2
NO/NC Trigger (auto-detected)
Trigger 3
N.C. Trigger
Trigger input timer
≥500ms
Auxiliary output current (max)
125mA
Operating temperature
32°~104°F (0°~40°C)
Storage temperature
-4°~140°F (-20°~60°C)
Weight
11.15-oz (316g)
Dimensions
6
11
/
16
"x4
11
/
16
"x1
1
/
2
" (170x119x38 mm)
1x Voice dialer unit
1x Telephone cable
1x Remote control instruction card
1x DC Plug-to-terminal block
3x Plastic wall anchors
3x Wall mount screws
1x Wall mounting template
1x User manual
Parts List:
* E-964-D390Q Photobeam Detectors, SM-200Q Magnetic Sensors, and SM-206Q Concealed Magnetic Sensors shown as
examples only: For other sensors and products available from SECO-LARM, please visit our website at www.seco-larm.com.
Specifications:
Wiring Diagram:
