Seccua UrSpring, Installation And User Instructions Manual

Page: 52 / 108

| MCL1-C | | 191301-C-CIFM | | STATUS: IN PRODUCTION | | UNCONTROLLED IF PRINTED OR DOWNLOADED |
All sizes in mm.
See Sheet 1 for Inch sizes
L ± 0.5
1. Mark required groove position on Tube, refering to
the table below.
2. Bring cutter wheel up to mark and pinch the Tube
between the rollers and the cutter wheel.
3. Turn handle 1/4 turn.
4. Rotate cutter around the Tube, ensuring a 360°
turn is made and that the complete groove is
aligned.
5. Remove cutter from Tube.
6. If groove is to be machined, use the details shown
here.
90°
0.05 0.08
SIZE 4mm 5mm 6mm 8mm 10mm 12mm 15mm 18mm 22mm
L 6.4 6.4 7.3 8.0 10.2 14.6 16.4 18.3 19.8
DS-1127
The information provided here relates to Stainless Steel and hard Tubing and to provide a groove beyond the collet
teeth upon full insertion of tube.
This groove will prevent the tube from slipping in most applications.
The use of a tube cutter to produce the groove is a suggestion only and the groove produced by this method will
depend on the model used.
It is the repsonsibility of the installer to check the integrity of the connection and the functionality of the groove.
Data Sheet
190322
Sht 2 of 2
The company has a policy of continuous research and development and reserves the right to
amend without notice the specification and design of all products illustrated. For details of
Terms and Conditions and any other technical enquiries, please contact our Customer Services
Department on 01895 449233. Alternatively, call our Technical Helpdesk on 01895 423333
The Copyright in this drawing and the products referred thereon belong to John Guest
International Limited and this drawing nor the information contained herein shall be
produced in any form or used for any purpose without written consent © 2019
Tube Groove Details - Standard Metric