Seccua UrSpring, Installation And User Instructions Manual

Page: 26 / 108

STEP 4 Prepare the O-rings and filter module
1. Remove the tape and protection caps from the top and bottom of the filter module.
2. Put on the sterile gloves.
3. Clean and disinfect the pipe tips that extend from the filter module using the alcohol pad.
4. Apply the supplied fo
ff od-grade sealant on the outer size of both pipe tips that extend
from the filter.
Use your fingers (with sterile gloves on) to spread the grease evenly over both pipe tips.
Make sure that you do not touch the pipe tips aft
ff er this step, to avoid contamination.
5. Apply the supplied fo ff od-grade grease to both O-rings.
6. Fit one of the O-rings in the end cap.
Page 26/50