Seccua UrSpring, Installation And User Instructions Manual

Page: 28 / 108

STEP 5 Place the filter module
1. Place the end cap on a flat surface and put the bottom of the filter in it.
2. Place the mounting clamps into the lower groove of the filter module.
3. Attach the clamps evenly using the four bolts (M8x50) until they touch the surface.
(hand-tight, do not used pliers or additional tools other than the Allen key supplied).
4. Fully insert the spacer pin in the end cap.
5. Carefully insert the filter module with the pipe tips vertically in the control unit.
Make sure that the spacer pin in the end cap is positioned to the wall, to keep the filter
module at the required distance.
6. Attach the filter module to the control unit using the stainless steel clamps in the upper
groove of the filter module.
Page 28/50